Preservac Teflon Heat Strip

Preservac Teflon heat strip

Replacement Preservac Teflon heat strip for all of the Preservac food vacuum sealers. Select the model of Preservac vacuum sealer to acquirer the correct one for your model of Preservac food vacuum sealer, PXR K1, PXR P2 and the i400.

Installing the Preservac Teflon heat strip

• Peel the old Teflon heat strip off.
• Insure the area is cleaned very well and do not disturb the wire.
• Cut the new one to sizes.
• Peel off the backing and stick it in place.
• Check that it has stuck by running one finger over it after you stick it down to ensure there are no bumps in the heat strip.

This Preservac Teflon heat strip

It is essential to ensure that the heat strip is in A1 condition to ensure you get the perfect seal after you have vacuumed the bag. Any damage or imperfections to the heat strip will affect the quality of seal and allow the bag to release its vacuum

To check the Preservac Teflon heat strip

You must always use a good quality roll film or bag to insure a good vacuum and a perfect seal. To check the seal hold it up to the light, and it should appear clear and of the same width all the way along. If it is not then do another seal beside it and if the interruption in the seal is in the same place then it is most likely a damaged or worn heat strip.