Heat Strip

$18.14 $9.05 GST Inc

In stock

Make 4 fortnightly payments of $2.26 with Afterpay More info

This Teflon Heat Strip is 10mm wide and 35cm long. It can be cut to the length that you rquire.

It is suitable for most domestic bench top machines.

Installing The Teflon Heat Strip

  • Peel the old heat strip off
  • Clean the area very well and do not disturb the wire
  • Cut the new one to sizes
  • peel the backing off the new one and stick it in place
  • Run a finger over it as you stick it down to ensure it is stuck and there are no bumps or ripples in it

$18.14 $9.05 GST Inc

In stock

Make 4 fortnightly payments of $2.26 with Afterpay More info

SKU: Heat Seal Category: Tags: , ,
This tefflon heat strip can easily fit a wide range of vacuum sealers on the market. If you are unsure please contact us with the the model, the width of the of the strip and the length. It is important to have this strip on your vacuum sealer as if it is not you will probably melt through the bag. It must also be in good condition or else it may effect certain parts of the seal.

To check theTeflon heat strip seal.

Firstly please use a good quality roll film as poor quality roll film will not seal properly any way. Do a seal on the end of the roll film. Then hold it up to the light. The seal should be clear, the same width all the way and no imperfections in it. If there is a fault in the seal then do another seal beside the first one. If the imperfection is in the same spot, then the teflon strip is probably damaged in that spot. It will need replaceing.

More selections found HERE

Munro products are also suplied by ZeroPak and can be found at BJ Enterprises and Marketing in Australia and C & M Marketing in New Zealand

VIP Newsletter Signup

Get The Latest Specials

Please wait...

Thank you for joining us!

Please follow and like us:
error0
YouTube
YouTube
Menu